Siding (construction)

Siding or wall cladding is the protective material attached to the exterior side of a wall of a house or other building. Along with the roof, it forms the first line of defense against the elements, most importantly sun, rain/snow, heat and cold, thus creating a stable, more comfortable environment on the interior side. The siding material and style also can enhance or detract from the building's beauty. There is a wide and expanding variety of materials to side with, both natural and artificial, each with its own benefits and drawbacks. Masonry walls as such do not require siding, but any wall can be sided. Walls that are internally framed, whether with wood, or steel I-beams, however, must always be sided.

Most siding consists of pieces of weather-resistant material that are smaller than the wall they cover, to allow for expansion and contraction of the materials due to moisture and temperature changes. There are various styles of joining the pieces, from board and batton, where the butt joints between panels is covered with a thin strip (usually 25 to 50 mm wide) of wood, to a variety of clapboard, also called lap siding, in which planks are laid horizontally across the wall starting from the bottom, and building up, the board below overlapped by the board above it. These techniques of joinery are designed to prevent water from entering the walls. Siding that does not consist of pieces joined would include stucco, which is widely used in the Southwestern United States. It is a plaster-like siding and is applied over a lattice, just like plaster. However, because of the lack of joints, it eventually cracks and is susceptible to water damage. Rainscreen construction is used to improve siding's ability to keep walls dry.

Wood siding

Left: Wood shingles; Center: Clapboard; Right: Board and batten.

Wood siding is very versatile in style and can be used on a wide variety of building structures. It can be painted or stained in any color palette desired.

Though installation and repair is relatively simple, wood siding requires more maintenance than other popular solutions, requiring treatment every four to nine years depending on the severity of the elements to which it is exposed. Ants and termites are a threat to many types of wood siding, such that extra treatment and maintenance that can significantly increase the cost in some pest-infested areas.

Wood is a moderately renewable resource and is biodegradable. However, most paints and stains used to treat wood are not environmentally friendly and can be toxic. Wood siding can provide some minor insulation and structural properties as compared to thinner cladding materials.

Shingles

Wood shingles or irregular cedar "shake" siding was used in early New England construction, and was revived in Shingle Style and Queen Anne style architecture in the late 19th century.

Clapboards

Wood siding in overlapping horizontal rows or "courses" is called clapboard, weatherboard (British English), or bevel siding which is made with beveled boards, thin at the top edge and thick at the butt.

In colonial North America, Eastern white pine was the most common material. Wood siding can also be made of naturally rot-resistant woods such as redwood or cedar.

Drop siding

Jointed horizontal siding (also called "drop" siding or novelty siding) may be shiplapped or tongue and grooved (though less common). Drop siding comes in a wide variety of face finishes, including Dutch Lap (also called German or Cove Lap) and log siding (milled with curve).

Vertical boards

Vertical siding may have a cover over the joint: board and batten, popular in American wooden Carpenter Gothic houses; or less commonly behind the joint called batten and board or reversed board and batten.

Wooden sheet siding

Plywood sheet siding is sometimes used on inexpensive buildings, sometimes with grooves to imitate vertical shiplap siding. One example of such grooved plywood siding is the type called Texture 1–11, T1-11, or T111 ("tee-one-eleven"). There is also a product known as reverse board-and-batten RBB that looks similar but has deeper grooves. Some of these products may be thick enough and rated for structural applications if properly fastened to studs. Both T-11 and RBB sheets are quick and easy to install as long as they are installed with compatible flashing at butt joints.

Stone siding

Slate shingles may be simple in form but many buildings with slate siding are highly decorative.

Plastic siding

Wood clapboard is often imitated using vinyl siding or uPVC weatherboarding. It is usually produced in units twice as high as clapboard. Plastic imitations of wood shingle and wood shakes also exist.

Since plastic siding is a manufactured product, it may come in unlimited color choices and styles. Historically vinyl sidings would fade, crack and buckle over time, requiring the siding to be replaced. However, newer vinyl options have improved and resist damage and wear better. Vinyl siding is sensitive to direct heat from grills, barbecues or other sources. Unlike wood, vinyl siding does not provide additional insulation for the building, unless an insulation material (e.g., foam) has been added to the product. It has also been criticized by some fire safety experts for its heat sensitivity. This sensitivity makes it easier for a house fire to jump to neighboring houses in comparison to materials such as brick, metal or masonry.

Vinyl siding has a potential environmental cost. While vinyl siding can be recycled, it cannot be burned (due to toxic dioxin gases that would be released). If dumped in a landfill, plastic siding does not break down quickly.

Vinyl siding is also considered one of the more unattractive siding choices by many. Although newer options and proper installation can eliminate this complaint, vinyl siding often has visible seam lines between panels and generally do not have the quality appearance of wood, brick, or masonry. The fading and cracking of older types of plastic siding compound this issue. In many areas of newer housing development, particularly in North America, entire neighbourhoods are often built with all houses clad in vinyl siding, given an unappealing uniformity. Some cities now campaign for house developers to incorporate varied types of siding during construction.

Imitation brick or stone–asphalt siding

A predecessor to modern maintenance free sidings was asphalt brick siding. Asphalt impregnated panels (about 2 by 4 ft or 0.61 by 1.22 m) give the appearance of brick or even stone. Many buildings have this siding, especially old sheds and garages. If the panels are straight and level and not damaged, the only indication that they are not real brick may be seen at the corner caps. Trademarked names included Insulbrick, Insulstone, Insulwood. Commonly used names now are faux brick, lick-it-and-stick-it brick, and ghetto brick. Often such siding is now covered with newer metal or plastic siding. Today thin panels of real brick are manufactured for veneer or siding.

Insulated siding

Insulated siding has emerged as a new siding category in recent years. Considered an improvement over vinyl siding, insulated siding is custom fit with expanded polystyrene foam (EPS) that is fused to the back of the siding, which fills the gap between the home and the siding.

Products provide environmental advantages by reducing energy use by up to 20 percent. On average, insulated siding products have an R-value of 3.96, triple that of other exterior cladding materials. Insulated siding products are typically Energy Star qualified, engineered in compliance with environmental standards set by the U.S. Department of Energy and the United States Environmental Protection Agency.

In addition to reducing energy consumption, insulated siding is a durable exterior product, designed to last more than 50 years, according to manufacturers. The foam provides rigidity for a more ding- and wind-resistant siding, maintaining a quality look for the life of the products. The foam backing also creates straighter lines when hung, providing a look more like that of wood siding, while remaining low maintenance.

Manufacturers report that insulated siding is permeable or "breathable", allowing water vapor to escape, which can protect against rot, mold and mildew, and help maintain healthy indoor air quality.

Metal siding

Metal siding comes in a variety of metals, styles, and colors. It is most often associated with modern, industrial, and retro buildings. Utilitarian buildings often use corrugated galvanized steel sheet siding or cladding, which often has a coloured vinyl finish. Corrugated aluminum cladding is also common where a more durable finish is required, while also being lightweight for easy shaping and installing making it a popular metal siding choice.

Formerly, imitation wood clapboard was made of aluminum (aluminum siding). That role is typically played by vinyl siding today. Aluminum siding is ideal for homes in coastal areas with much moisture and salt, since aluminum reacts with air to form aluminum oxide, an extremely hard coating that seals the aluminum surface from further degradation. In contrast, steel forms rust, which can weaken the structure of the material, and corrosion-resistant coatings for steel, such as zinc, sometimes fail around the edges as years pass. However, an advantage of steel siding can be its dent-resistance, which is excellent for regions with severe storms—especially if the area is prone to hail.

The first architectural application of aluminum was the mounting of a small grounding cap on the Washington Monument in 1884. Sheet-iron or steel clapboard siding units had been patented in 1903, and Sears, Roebuck & Company had been offering embossed steel siding in stone and brick patterns in their catalogues for several years by the 1930s. Alcoa began promoting the use of aluminum in architecture by the 1920s when it produced ornamental spandrel panels for the Cathedral of Learning and the Chrysler and Empire State Buildings in New York. The exterior of the A.O. Smith Corporation Building in Milwaukee was clad entirely in aluminum by 1930, and 3-foot-square (0.91 m) siding panels of Duralumin sheet from Alcoa sheathed an experimental exhibit house for the Architectural League of New York in 1931. Most architectural applications of aluminum in the 1930s were on a monumental scale, and it was another six years before it was put to use on residential construction.

In the first few years after World War II, manufacturers began developing and widely distributing aluminum siding. Among them Indiana businessman Frank Hoess was credited with the invention of the configuration seen on modern aluminum siding. His experiments began in 1937 with steel siding in imitation of wooden clapboards. Other types of sheet metal and steel siding on the market at the time presented problems with warping, creating openings through which water could enter, introducing rust. Hoess remedied this problem through the use of a locking joint, which was formed by small flap at the top of each panel that joined with a U-shaped flange on the lower edge of the previous panel thus forming a watertight horizontal seam. After he had received a patent for his siding in 1939, Hoess produced a small housing development of about forty-four houses covered in his clapboard-style steel siding for blue-collar workers in Chicago. His operations were curtailed when war plants commandeered the industry. In 1946 Hoess allied with Metal Building Products of Detroit, a corporation that promoted and sold Hoess siding of Alcoa aluminum. Their product was used on large housing projects in the northeast and was purportedly the siding of choice for a 1947 Pennsylvania development, the first subdivision to solely use aluminum siding. Products such as 4,-6,-8-and-10-inch (100, 150, 200 and 250 mm) by 12-foot (3.7 m) unpainted aluminum panels, starter strips, corner pieces and specialized application clips were assembled in the Indiana shop of the Hoess brothers. Siding could be applied over conventional wooden clapboards, or it could be nailed to studs via special clips affixed to the top of each panel. Insulation was placed between studs. While the Hoess Brothers company continued to function for about twelve more years after the dissolution of the Metal Building Products Corporation in 1948, they were less successful than rising siding companies like Reynolds Metals.^[1]^[2]

Thatch siding

Thatch is an ancient and very widespread building material used on roofs and walls. Thatch siding is made with dry vegetation such as longstraw, water reeds, or combed wheat reed. The materials are overlapped and weaved in patterns designed to deflect and direct water.

Masonry siding

Stone and masonry veneer is sometimes considered siding, are varied and can accommodate a variety of styles—from formal to rustic. Though masonry can be painted or tinted to match many color palettes, it is most suited to neutral earth tones, and coatings such as roughcast and pebbeldash. Masonry has excellent durability (over 100 years), and minimal maintenance is required. The primary drawback to masonry siding is the initial cost.

Precipitation can threaten the structure of buildings, so it is important that the siding will be able to withstand the weather conditions in the local region. For rainy regions, exterior insulation finishing systems (EIFS) have been known to suffer underlying wood rot problems with excessive moisture exposure.

The environmental impact of masonry depends on the type of material used. In general, concrete and concrete based materials are intensive energy materials to produce. However, the long durability and minimal maintenance of masonry sidings mean that less energy is required over the life of the siding.

Composite siding

Various composite materials are also used for siding: asphalt shingles, asbestos, fiber cement, aluminum (ACM), fiberboard, hardboard, etc. They may be in the form of shingles or boards, in which case they are sometimes called clapboard.

Composite sidings are available in many styles and can mimic the other siding options. Composite materials are ideal for achieving a certain style or 'look' that may not be suited to the local environment (e.g., corrugated aluminum siding in an area prone to severe storms; steel in coastal climates; wood siding in termite-infested regions).

Costs of composites tend to be lower than wood options, but vary widely as do installation, maintenance and repair requirements. Not surprisingly, the durability and environmental impact of composite sidings depends on the specific materials used in the manufacturing process.

Fiber cement siding is a class of composite siding that is usually made from a combination of cement, cellulose (wood), sand, and water. They are either coated or painted in the factory or installed and then painted after installation. Fiber cement is popular for its realistic look, durability, low-maintenance properties, fire resistance, and its lightweight properties compared to traditional wood siding. Composite siding products containing cellulose (wood fibers) have been shown to have problems with deterioration, delamination, or loss of coating adhesion in certain climates or under certain environmental conditions.

A younger class of non-wood synthetic siding has sprouted in the past 15 years. These products are usually made from a combination of non-wood materials such as polymeric resins, fiberglass, stone, sand, and fly ash and are chosen for their durability, curb appeal, and ease of maintenance. Given the newness of such technologies, product lifespan can only be estimated, varieties are limited, and distribution is sporadic.

[1]

[2]

Siding Material	Resilience	Upkeep Level	Best Climate
Vinyl	Medium	Low	Varied
Wood	Medium-High	High	Dry to Moderate
Fiber Cement	High	Medium	All
Metal	High	Low	Damp and Dry
Stucco	Medium	Medium	Dry

Common Surface Problems	Effect on Siding	Inspection Focus
Rot and Mold	Weakens substrate, leads to siding failure	Probe with moisture meter, visual evaluation
Unequal Sheathing	Causes siding to warp or bulge	Usage straightedge and level for detection
Old Fasteners	Block smooth siding installation	Remove all protruding nails and staples
Debris and Dust	Avoids correct adhesion of barriers and siding	Comprehensive cleaning before setup

Common Siding Issues	Early Alerting Indications	Expert Repair Work Advice
Cracks and Splits	Noticeable lines, water infiltration	Change damaged boards immediately; seal edges carefully
Loose or Missing Out On Panels	Rattling noises on windy days	Protected fasteners; think about upgrading to corrosion-resistant nails
Fading and Discoloration	Dull spots, peeling paint	Apply UV-protective coatings during repainting

21201	21201 is a Baltimore MD post code encompassing the Inner Harbor and city center business area. It includes attractions such as the National Aquarium and a combination of residential and commercial buildings.	https://en.wikipedia.org/wiki/List_of_ZIP_codes_in_Maryland
21202	21202 is a city center Baltimore MD zip code including the Inner Harbor and surrounding business district. It is a vibrant area with attractions, offices, and residential skyscrapers.	https://en.wikipedia.org/wiki/ZIP_code
21203	21203 is a Baltimore MD postal code including areas such as Fells Point and Little Italy. It's known for its historic waterfront, vibrant arts scene, and varied food selections.	https://en.wikipedia.org/wiki/Baltimore
21205	21205 is a Baltimore MD postal code including neighborhoods such as Berea and Broadway East. It is located northeast of downtown, with a mix of housing areas and business districts.	https://en.wikipedia.org/wiki/Baltimore
21206	21206 is a Baltimore MD zip code linked to the neighborhoods of Northeastern Baltimore MD including Beverly Hills and Hillen. It is mainly residential with a mix of housing types and nearby businesses.	https://en.wikipedia.org/wiki/List_of_ZIP_codes_in_Maryland
21207	21207 is a Baltimore MD postal code including areas such as Gwynn Oak and West Hills. It's a mostly housing area with a combination of home styles and nearby businesses.	https://en.wikipedia.org/wiki/Baltimore
21208	21208 is a Baltimore MD postal zip code primarily covering the neighborhoods of Roland Park and Hampden. It's known for its historical architecture, vibrant arts community, and closeness to attractions such as the Avenue in Hampden.	https://en.wikipedia.org/wiki/List_of_ZIP_code_prefixes_(Baltimore)
21209	21209 is a zip code mainly in Baltimore MD, including areas such as Roland Park and Hampden. It is known for its historic architecture, parks, and vibrant shops.	https://en.wikipedia.org/wiki/Baltimore
21210	21210 in Baltimore MD is a diverse area encompassing residential communities and business areas. It's known for Loyola University Maryland and nearby sites like Lake Roland.	https://en.wikipedia.org/wiki/Curtis_Bay,_Baltimore
21211	21211 is a Baltimore MD zip code encompassing the Roland Park, Hampden, and Remington neighborhoods. It's renowned for its historical architecture, dynamic arts community, and close proximity to Johns Hopkins University.	https://en.wikipedia.org/wiki/List_of_ZIP_codes_in_Maryland
21212	21212 is a Baltimore MD postal code encompassing the Roland Park neighborhood and adjacent residential locations. It's known for its historic buildings, green areas, and closeness to local services.	https://en.wikipedia.org/wiki/List_of_ZIP_codes_in_Maryland
21213	21213 is a Baltimore MD zip code associated with the Pen Lucy area. Residents there enjoy a mix of urban living and civic engagement.	https://en.wikipedia.org/wiki/Baltimore
21214	21214 is a Baltimore MD postal code linked with the Towson locale. It encompasses domestic neighborhoods, business districts, and educational institutions such as Towson University.	https://en.wikipedia.org/wiki/List_of_ZIP_codes_in_Maryland
21215	21215 is a Baltimore MD post code linked with the Roland Park area and nearby locations. It has residential homes, schools, and local businesses.	https://en.wikipedia.org/wiki/List_of_ZIP_codes_in_Maryland
21216	21216 is a Baltimore MD postal code primarily encompassing the Mount Washington area. It is a mostly residential area recognized for its historic architecture and closeness to parks.	https://en.wikipedia.org/wiki/Curtis_Bay,_Baltimore
21217	21217 is a Baltimore MD zip code including the Greenmount East and Pen Lucy neighborhoods. It is known by a blend of housing, public parks, and nearby businesses.	https://en.wikipedia.org/wiki/List_of_ZIP_codes_in_Maryland
21218	21218 is a Baltimore MD postcode covering neighborhoods like Charles Village and Abell. It is renowned for its vibrant arts community, historic architecture, and closeness to Johns Hopkins University.	https://en.wikipedia.org/wiki/Baltimore_County,_Maryland
21223	21223 is a Baltimore MD post code covering the Curtis Bay and Hawkins Point areas. These areas are largely industrial and include the location of the Quarantine Road Landfill.	https://en.wikipedia.org/wiki/Baltimore
21224	21224 is a Baltimore MD postal code mainly covering Canton and Brewers Hill neighborhoods. It's a vibrant area recognized for its waterfront entry and historic architecture.	https://en.wikipedia.org/wiki/Baltimore_County,_Maryland
21225	21225 is a Baltimore MD zip code mainly covering the Frankford area. It is a residential area with a mix of housing types and local businesses.	https://en.wikipedia.org/wiki/Baltimore
21226	21226 is a Baltimore MD post code mainly including the Curtis Bay community. It's a largely industrial and residential location located in the southern part of the city.	https://en.wikipedia.org/wiki/Baltimore_County,_Maryland
21227	21227 is a Baltimore MD post code encompassing areas such as Violetville and Yale Heights. It'slocated in the southwestern part of the city.	https://en.wikipedia.org/wiki/Baltimore
21228	The 21228 area code is a Baltimore MD postal code mainly covering the neighborhood of Catonsville. It is located to the west of downtown Baltimore and is adjacent to Baltimore County.	https://en.wikipedia.org/wiki/Baltimore
21229	21229 is a Baltimore MD zip code including neighborhoods like Forest Park and Howard Park. It's a primarily residential area with a mix of housing styles and nearby shops.	https://en.wikipedia.org/wiki/Baltimore
21230	21230 is a Baltimore MD postal code covering the Inner Harbor and nearby downtown district. It's a dynamic commercial, tourist, and residential center with attractions such as the National Aquarium and Harborplace.	https://en.wikipedia.org/wiki/Medfield,_Baltimore
21231	That 21231 ZIP code in Baltimore MD, mainly covers Canton, a waterfront neighborhood recognized for its historic rowhouses and dynamic bar scene. It also includes parts of Brewers Hill and Highlandtown, supplying a mixture of residential and industrial spaces.	https://en.wikipedia.org/wiki/List_of_ZIP_codes_in_Maryland
21233	21233 is a Baltimore MD zip code primarily covering the East Baltimore Midway neighborhood. It is recognized for its housing roads and proximity to Johns Hopkins Hospital.	https://en.wikipedia.org/wiki/List_of_ZIP_codes_in_Maryland
21234	21234 is a Baltimore MD post code chiefly covering the Locust Point and Fort McHenry neighborhoods. It is a dynamic coastal community with historic significance and contemporary amenities.	https://en.wikipedia.org/wiki/Baltimore
21236	21236 in Baltimore MD, is a diverse region with residential communities and business areas. It includes areas such as Nottingham and Overlea, providing a combination of housing options and nearby facilities.	https://en.wikipedia.org/wiki/Baltimore
21237	21237 is a Baltimore MD postal code including the Hawkins Point and Wagner's Point areas. It is primarily an manufacturing area close to the Patapsco River and provides access to the Francis Scott Key Bridge.	https://en.wikipedia.org/wiki/Baltimore_ZIP_codes
21239	21239 in Baltimore MD, lies in the northern part of the town and contains residential areas. It is near Cylburn Arboretum and Sinai Hospital.	https://en.wikipedia.org/wiki/Baltimore
21251	The 21251 zip code encompasses the western part of Baltimore County, including areas like Pikesville. It includes a blend of residential neighborhoods, commercial districts, and parks.	https://en.wikipedia.org/wiki/Baltimore
21287	21287 is a Baltimore MD zip code primarily including Towson and Riderwood. It consists of housing developments, businesses, and educational institutions like Loyola University Maryland.	https://en.wikipedia.org/wiki/ZIP_code

Residential siding solutions

Residential siding solutions: We Concentrate On Outside Cladding Replacement To Improve Your Home'S Sturdiness And Appearance

Checking out the Spectrum: Types of Siding Products

Typically Utilized Siding Products

Why Does the Option Matter So Much?

Turning Difficulties into Accomplishments

Precise Surface Area Examination: The Unsung Hero of Siding Setup

Professional Tips for Preparing Your Surface Like a Pro

Why Preparation is More Than Simply a Step-- It's an Investment

Mastering Setup Methods and Tools

Accuracy Tools: The Unsung Heroes

Techniques That Surpass the Basics

Installation Tips from the Field

Why Accuracy Matters More Than You Think

Maintenance and Repair Tips for Long-Lasting Siding

Pro Tips for Siding Maintenance

Discovering and Repairing Damage Early

Professional Siding Solutions in Baltimore, MD

CRG Roofing and Siding

Photos & videos

Don't see what you need here?

Review summary

Reviews

People also search for

Web results

CRG Roofing and Siding ✔️

Current address

Website

Phone

Business status

Latitude/Longitude

Categories

Place ID

Knowledge Panel ID (KG ID)

CID Number

Business Profile ID

Other GMB details

Review list display link

Review request link

Knowledge Panel page link

GMB Post URL

Ask question request URL

Questions and answers URL

Products

Services

Other GMB's at same address

GMB's with same website domain

GMB link with Place ID

GMB link with CID

External audit links

SEO audit links

Website cache with Google

Website content indexed by Google

Website content indexed by Google last week

Website content indexed by Google last month

Website content indexed by Google in the last 6 months

Analyze website traffic

Analyze mobile friendliness

Website audit links

Google Page Speed score

Domain name lookup

Technology used on website

Website schema(Structured data) analyzer

Website audit

Website history

CRG Roofing and Siding Baltimore

Your Source for Exceptional Roofing and Siding Services in Baltimore and the Surrounding Counties.

24 YearsExperience

Find Us On Social Media

Quick Links

Main Services

Contact Us